Feruloyl esterases are enzymes of industrial interest that catalyse the hydrolysis of the ester bond between hydroxycinnamic acids such as ferulic acid and sugars present in the plant cell wall. Although there are several structures of biochemically characterized feruloyl esterases available, the structural determinants of their substrate specificity are not yet fully understood. Here, we present the crystal structure of a feruloyl esterase from Fusarium oxysporum (FoFaeC) at 2.3 A resolution. Similar to the two other tannase-like feruloyl esterases, FoFaeC features a large lid domain covering the active site with potential regulatory role and a disulphide bond that brings together the serine and histidine of the catalytic triad. Differences are mainly observed in the metal coordination site and the substrate binding pocket. ENZYMES: E.C.3.1.1.73. DATABASES: The sequence of FoFaeC has been deposited with UniProt with accession code A0A1D3S5H0_FUSOX and the atomic coordinates of the three-dimensional structure with Protein Data Bank, with PDB code: 6FAT.
Title: Screening of novel feruloyl esterases from Talaromyces wortmannii for the development of efficient and sustainable syntheses of feruloyl derivatives Antonopoulou I, Iancu L, Jutten P, Piechot A, Rova U, Christakopoulos P Ref: Enzyme Microb Technol, 120:124, 2019 : PubMed
The feruloyl esterases Fae125, Fae7262 and Fae68 from Talaromyces wortmannii were screened in 10 different solvent: buffer systems in terms of residual hydrolytic activity and of the ability for the transesterification of vinyl ferulate with prenol or l-arabinose. Among the tested enzymes, the acetyl xylan-related Fae125 belonging to the phylogenetic subfamily 5 showed highest yield and selectivity for both products in alkane: buffer systems (n-hexane or n-octane). Response surface methodology, based on a 5-level and 6-factor central composite design, revealed that the substrate molar ratio and the water content were the most significant variables for the bioconversion yield and selectivity. The effect of agitation, the possibility of DMSO addition and the increase of donor concentration were investigated. After optimization, competitive transesterification yields were obtained for prenyl ferulate (87.5-92.6%) and l-arabinose ferulate (56.2-61.7%) at reduced reaction times (<=24 h) resulting in good productivities (>1 g/L/h, >300 kg product/kg FAE). The enzyme could be recycled for six consecutive cycles retaining 66.6% of the synthetic activity and 100% of the selectivity.
The need to develop competitive and eco-friendly processes in the cosmetic industry leads to the search for new enzymes with improved properties for industrial bioconversions in this sector. In the present study, a complete methodology to generate, express and screen diversity for the type C feruloyl esterase from Fusarium oxysporium FoFaeC was set up in a high-throughput fashion. A library of around 30,000 random mutants of FoFaeC was generated by error prone PCR of fofaec cDNA and expressed in Yarrowia lipolytica. Screening for enzymatic activity towards the substrates 5-bromo-4-chloroindol-3-yl and 4-nitrocatechol-1-yl ferulates allowed the selection of 96 enzyme variants endowed with improved enzymatic activity that were then characterized for thermo- and solvent- tolerance. The five best mutants in terms of higher activity, thermo- and solvent- tolerance were selected for analysis of substrate specificity. Variant L432I was shown to be able to hydrolyze all the tested substrates, except methyl sinapate, with higher activity than wild type FoFaeC towards methyl p-coumarate, methyl ferulate and methyl caffeate. Moreover, the E455D variant was found to maintain completely its hydrolytic activity after two hour incubation at 55 degrees C, whereas the L284Q/V405I variant showed both higher thermo- and solvent- tolerance than wild type FoFaeC. Small molecule docking simulations were applied to the five novel selected variants in order to examine the binding pattern of substrates used for enzyme characterization of wild type FoFaeC and the evolved variants.
Thermophilic enzyme systems are of major importance nowadays in all industrial processes due to their great performance at elevated temperatures. In the present review, an overview of the current knowledge on the properties of thermophilic and thermotolerant carbohydrate esterases and oxidative enzymes with great thermostability is provided, with respect to their potential use in biotechnological applications. A special focus is given to the lytic polysaccharide monooxygenases that are able to oxidatively cleave lignocellulose through the use of oxygen or hydrogen peroxide as co-substrate and a reducing agent as electron donor. Structural characteristics of the enzymes, including active site conformation and surface properties are discussed and correlated with their substrate specificity and thermostability properties.
The type C feruloyl esterase FoFaeC from Fusarium oxysporum is a newly discovered enzyme with high potential for use in the hydrolysis of lignocellulosic biomass but it shows low activity towards sinapates. In this work, small molecule docking simulations were employed in order to identify important residues for the binding of the four model methyl esters of hydroxycinnamic acids, methyl ferulate/caffeate/sinapate/p-coumarate, to the predicted structure of FoFaeC. Subsequently rational redesign was applied to the enzyme' active site in order to improve its specificity towards methyl sinapate. A double mutation (F230H/T202V) was considered to provide hydrophobic environment for stabilization of the methoxy substitution on sinapate and a larger binding pocket. Five mutant clones and the wild type were produced in Pichia pastoris and biochemically characterized. All clones showed improved activity, substrate affinity, catalytic efficiency and turnover rate compared to the wild type against methyl sinapate, with clone P13 showing a 5-fold improvement in catalytic efficiency. Although the affinity of all mutant clones was improved against the four model substrates, the catalytic efficiency and turnover rate decreased for the substrates containing a hydroxyl substitution.
The chemical syntheses currently employed for industrial purposes, including in the manufacture of cosmetics, present limitations such as unwanted side reactions and the need for harsh chemical reaction conditions. In order to overcome these drawbacks, novel enzymes are developed to catalyze the targeted bioconversions. In the present study, a methodology for the construction and the automated screening of evolved variants library of a Type B feruloyl esterase from Myceliophthora thermophila (MtFae1a) was developed and applied to generation of 30,000 mutants and their screening for selecting the variants with higher activity than the wild-type enzyme. The library was generated by error-prone PCR of mtfae1a cDNA and expressed in Saccharomyces cerevisiae. Screening for extracellular enzymatic activity towards 4-nitrocatechol-1-yl ferulate, a new substrate developed ad hoc for high-throughput assays of feruloyl esterases, led to the selection of 30 improved enzyme variants. The best four variants and the wild-type MtFae1a were investigated in docking experiments with hydroxycinnamic acid esters using a model of 3D structure of MtFae1a. These variants were also used as biocatalysts in transesterification reactions leading to different target products in detergentless microemulsions and showed enhanced synthetic activities, although the screening strategy had been based on improved hydrolytic activity.
Five feruloyl esterases (FAEs; EC 3.1.1.73), FaeA1, FaeA2, FaeB1, and FaeB2 from Myceliophthora thermophila C1 and MtFae1a from M. thermophila ATCC 42464, were tested for their ability to catalyze the transesterification of vinyl ferulate (VFA) with prenol in detergentless microemulsions. Reaction conditions were optimized investigating parameters such as the medium composition, the substrate concentration, the enzyme load, the pH, the temperature, and agitation. FaeB2 offered the highest transesterification yield (71.5 +/- 0.2%) after 24 h of incubation at 30 degrees C using 60 mM VFA, 1 M prenol, and 0.02 mg FAE/mL in a mixture comprising of 53.4:43.4:3.2 v/v/v n-hexane:t-butanol:100 mM MOPS-NaOH, pH 6.0. At these conditions, the competitive side hydrolysis of VFA was 4.7-fold minimized. The ability of prenyl ferulate (PFA) and its corresponding ferulic acid (FA) to scavenge 1,1-diphenyl-2-picrylhydrazyl (DPPH) radicals was significant and similar (IC50 423.39 muM for PFA, 329.9 muM for FA). PFA was not cytotoxic at 0.8-100 muM (IC50 220.23 muM) and reduced intracellular reactive oxygen species (ROS) in human skin fibroblasts at concentrations ranging between 4 and 20 muM as determined with the dichloro-dihydro-fluorescein diacetate (DCFH-DA) assay.
Ferulic acid esterases (FAE, EC 3.1.1.73) cleave the arabinose hydroxycinnamate ester in plant hemicellulose and other related substrates. FAE are commonly categorised as type A-D based on catalytic activities towards model, short alkyl chain esters of hydroxycinnamates. However, this system correlates poorly with sequence and structural features of the enzymes. In this study, we investigated the basis of the type A categorisation of an FAE from Aspergillus niger, AnFaeA, by comparing its activity toward methyl and arabinose hydroxycinnamate esters. kcat/Km ratios revealed that AnFaeA hydrolysed arabinose ferulate 1600-fold, and arabinose caffeate 6.5 times more efficiently than their methyl ester counterparts. Furthermore, small docking studies showed that while all substrates adopted a catalytic orientation with requisite proximity to the catalytic serine, methyl caffeate and methyl p-coumarate preferentially formed alternative non-catalytic conformations that were energetically favoured. Arabinose ferulate was unable to adopt the alternative conformation while arabinose caffeate preferred the catalytic orientation. This study demonstrates that use of short alkyl chain hydroxycinnnamate esters can result in activity misclassification. The findings of this study provide a basis for developing a robust classification system for FAE and form the basis of sequence-function relationships for this class.
BACKGROUND: Cutinases are serine hydrolases that degrade cutin, a polyester of fatty acids that is the main component of plant cuticle. These biocatalysts have recently attracted increased biotechnological interest due to their potential to modify and degrade polyethylene terephthalate (PET), as well as other synthetic polymers. METHODS: A cutinase from the mesophilic fungus Fusarium oxysporum, named FoCut5a, was expressed either in the cytoplasm or periplasm of Escherichia coli BL21. Its X-ray structure was determined to 1.9A resolution using molecular replacement. The activity of the recombinant enzyme was tested on a variety of synthetic esters and polyester analogues. RESULTS: The highest production of recombinant FoCut5a was achieved using periplasmic expression at 16 degrees C. Its crystal structure is highly similar to previously determined Fusarium solani cutinase structure. However, a more detailed comparison of the surface properties and amino acid interactions revealed differences with potential impact on the biochemical properties of the two enzymes. FoCut5a showed maximum activity at 40 degrees C and pH8.0, while it was active on three p-nitrophenyl synthetic esters of aliphatic acids (C2, C4, C12), with the highest catalytic efficiency for the hydrolysis of the butyl ester. The recombinant cutinase was also found capable of hydrolyzing PET model substrates and synthetic polymers. CONCLUSIONS: The present work is the first reported expression and crystal structure determination of a functional cutinase from the mesophilic fungus F. oxysporum with potential application in surface modification of PET synthetic polymers. GENERAL SIGNIFICANCE: FoCut5a could be used as a biocatalyst in industrial applications for the environmentally-friendly treatment of synthetic polymers.
Research on glucuronoyl esterases (GEs) has been hampered by the lack of enzyme assays based on easily obtainable substrates. While benzyl d-glucuronic acid ester (BnGlcA) is a commercially available substrate that can be used for GE assays, several considerations regarding substrate instability, limited solubility and low apparent affinities should be made. In this work we discuss the factors that are important when using BnGlcA for assaying GE activity and show how these can be applied when designing BnGlcA-based GE assays for different applications: a thin-layer chromatography assay for qualitative activity detection, a coupled-enzyme spectrophotometric assay that can be used for high-throughput screening or general activity determinations and a HPLC-based detection method allowing kinetic determinations. The three-level experimental procedure not merely facilitates routine, fast and simple biochemical characterizations but it can also give rise to the discovery of different GEs through an extensive screening of heterologous Genomic and Metagenomic expression libraries.
Glucuronoyl esterases (GEs) are recently discovered enzymes that are suggested to cleave the ester bond between lignin alcohols and xylan-bound 4-O-methyl-D-glucuronic acid. Although their potential use for enhanced enzymatic biomass degradation and synthesis of valuable chemicals renders them attractive research targets for biotechnological applications, the difficulty to purify natural fractions of lignin-carbohydrate complexes hampers the characterization of fungal GEs. In this work, we report the synthesis of three aryl alkyl or alkenyl D-glucuronate esters using lipase B from Candida antarctica (CALB) and their use to determine the kinetic parameters of two GEs, StGE2 from the thermophilic fungus Myceliophthora thermophila (syn. Sporotrichum thermophile) and PaGE1 from the coprophilous fungus Podospora anserina. PaGE1 was functionally expressed in the methylotrophic yeast Pichia pastoris under the transcriptional control of the alcohol oxidase (AOX1) promoter and purified to its homogeneity (63 kDa). The three D-glucuronate esters contain an aromatic UV-absorbing phenol group that facilitates the quantification of their enzymatic hydrolysis by HPLC. Both enzymes were able to hydrolyze the synthetic esters with a pronounced preference towards the cinnamyl-D-glucuronate ester. The experimental results were corroborated by computational docking of the synthesized substrate analogues. We show that the nature of the alcohol portion of the hydrolyzed ester influences the catalytic efficiency of the two GEs.
Title: The structure of a novel glucuronoyl esterase from Myceliophthora thermophila gives new insights into its role as a potential biocatalyst. Charavgi MD, Dimarogona M, Topakas E, Christakopoulos P, Chrysina ED Ref: Acta Crystallographica D Biol Crystallogr, 69:63, 2013 : PubMed
The increasing demand for the development of efficient biocatalysts is a consequence of their broad industrial applications. Typical difficulties that are encountered during their exploitation in a variety of processes are interconnected with factors such as temperature, pH, product inhibitors etc. To eliminate these, research has been directed towards the identification of new enzymes that would comply with the required standards. To this end, the recently discovered glucuronoyl esterases (GEs) are an enigmatic family within the carbohydrate esterase (CE) family. Structures of the thermophilic StGE2 esterase from Myceliophthora thermophila (synonym Sporotrichum thermophile), a member of the CE15 family, and its S213A mutant were determined at 1.55 and 1.9A resolution, respectively. The first crystal structure of the S213A mutant in complex with a substrate analogue, methyl 4-O-methyl-beta-D-glucopyranuronate, was determined at 2.35A resolution. All of the three-dimensional protein structures have an alpha/betahydrolase fold with a three-layer alphabetaalpha-sandwich architecture and a Rossmann topology and comprise one molecule per asymmetric unit. These are the first crystal structures of a thermophilic GE both in an unliganded form and bound to a substrate analogue, thus unravelling the organization of the catalytic triad residues and their neighbours lining the active site. The knowledge derived offers novel insights into the key structural elements that drive the hydrolysis of glucuronic acid esters.
Title: Expression, characterization and structural modelling of a feruloyl esterase from the thermophilic fungus Myceliophthora thermophila Topakas E, Moukouli M, Dimarogona M, Christakopoulos P Ref: Applied Microbiology & Biotechnology, 94:399, 2012 : PubMed
A ferulic acid esterase (FAE) from the thermophilic fungus Myceliophthora thermophila (synonym Sporotrichum thermophile), belonging to the carbohydrate esterase family 1 (CE-1), was functionally expressed in methylotrophic yeast Pichia pastoris. The putative FAE from the genomic DNA was successfully cloned in P. pastoris X-33 to confirm that the enzyme exhibits FAE activity. The recombinant FAE was purified to its homogeneity (39 kDa) and subsequently characterized using a series of model substrates including methyl esters of hydroxycinnamates, alkyl ferulates and monoferuloylated 4-nitrophenyl glycosides. The substrate specificity profiling reveals that the enzyme shows a preference for the hydrolysis of methyl caffeate and p-coumarate and a strong preference for the hydrolysis of n-butyl and iso-butyl ferulate. The enzyme was active on substrates containing ferulic acid ester linked to the C-5 and C-2 linkages of arabinofuranose, whilst it was found capable of de-esterifying acetylated glucuronoxylans. Ferulic acid (FA) was efficiently released from destarched wheat bran when the esterase was incubated together with an M3 xylanase from Trichoderma longibrachiatum (a maximum of 41% total FA released after 1 h incubation). Prediction of the secondary structure of MtFae1a was performed in the PSIPRED server whilst modelling the 3D structure was accomplished by the use of the HH 3D structure prediction server.
Title: Functional expression of a thermophilic glucuronyl esterase from Sporotrichum thermophile: identification of the nucleophilic serine Topakas E, Moukouli M, Dimarogona M, Vafiadi C, Christakopoulos P Ref: Applied Microbiology & Biotechnology, 87:1765, 2010 : PubMed
A glucuronyl esterase (GE) from the thermophilic fungus Sporotrichum thermophile, belonging to the carbohydrate esterase family 15 (CE-15), was functionally expressed in the methylotrophic yeast Pichia pastoris. The putative GE gene ge2 from the genomic DNA was successfully cloned in frame with the sequence for the Saccharomyces cerevisiae alpha-factor secretion signal under the transcriptional control of the alcohol oxidase (AOX1) promoter and integrated in P. pastoris X-33 to confirm that the encoded enzyme StGE2 exhibits esterase activity. The enzyme was active on substrates containing glucuronic acid methyl ester, showing optimal activity at pH 7.0 and 55 degrees C. The esterase displayed broad pH range stability between 4-10 and temperature stability up to 50 degrees C, rendering StGE2 a strong candidate for future biotechnological applications that require robust biocatalysts. ClustalW alignment of StGE2 with characterized GEs and selected homologous sequences, members of CE-15 family, revealed a novel consensus sequence G-C-S-R-X-G that features the characteristic serine residue involved in the generally conserved catalytic mechanism of the esterase family. The putative serine has been mutated, and the corresponding enzyme has been expressed in P. pastoris to prove that the candidate nucleophilic residue is responsible for catalyzing the enzymatic reaction.
Title: Purification, characterization and mass spectrometric sequencing of a thermophilic glucuronoyl esterase from Sporotrichum thermophile. Vafiadi C, Topakas E, Biely P, Christakopoulos P Ref: FEMS Microbiology Letters, 296:178, 2009 : PubMed
The cellulolytic system of the thermophilic fungus Sporotrichum thermophile contains a recently discovered esterase that may hydrolyze the ester linkage between the 4-O-methyl-D-glucuronic acid of glucuronoxylan and lignin alcohols. The glucuronoyl esterase named StGE1 was purified to homogeneity with a molecular mass of M(r) 58 kDa and pI 6.7. The enzyme activity was optimal at pH 6.0 and 60 degrees C. The esterase displayed a narrow pH range stability at pH 8.0 and retained 50% of its activity after 430 and 286 min at 50 and 55 degrees C, respectively. The enzyme was active on substrates containing glucuronic acid methyl ester, showing a lower catalytic efficiency on 4-nitrophenyl 2-O-(methyl-4-O-methyl-alpha-d-glucopyranosyluronate)-beta-D-xylopyranoside than its mesophilic counterparts reported in the literature, which is typical of thermophilic enzymes. StGE1 was proved to be a modular enzyme containing a noncatalytic carbohydrate-binding module. LC-MS/MS analysis provided peptide mass and sequence information that facilitated the identification and classification of StGE1 as a family 15 glucuronoyl esterase that showed the highest homology with the hypothetical glucuronoyl esterase CHGG_10774 of Chaetomium globosum CBS 148.51. This work represents the first example of the purification and identification of a thermophilic glucuronoyl esterase from S. thermophile.
The ability of a feruloyl esterase (AnFaeA), either in free or immobilised (cross-linked enzyme aggregates) form, to catalyse the esterification of glycerol, a major by-product of the biodiesel industry, with sinapic acid was studied in four hexafluorophosphate anion-containing ionic liquids: ([Bmim][PF(6)], [Omim][PF(6)], [C(2)OHmim][PF(6)] and [C(5)O(2)mim][PF(6)]). Such ionic liquids are considered 'green' reaction systems. The synthetic reaction was optimised in [C(2)OHmim][PF(6)] and the highest conversion yield was 72.5+/-2.1%, while, at the same reaction conditions in [C(5)O(2)mim] [PF(6)], a similar conversion yield was obtained (76.7+/-1.5%). AnFaeA was active in its free and immobilised form, with the latter retaining a part of its synthetic activity after 5 consecutive 24h-period reaction cycles. Sinapic acid was esterified to one of the primary hydroxyl groups of glycerol and retained, after esterification, 63.1+/-0.3% and 89.5+/-1.1% of its antioxidant activity against low-density lipoprotein oxidation, when added at concentrations of 10 and 60muM, respectively, in the assay mixture.
Title: Cloning, characterization and functional expression of an alkalitolerant type C feruloyl esterase from Fusarium oxysporum Moukouli M, Topakas E, Christakopoulos P Ref: Applied Microbiology & Biotechnology, 79:245, 2008 : PubMed
A hypothetical protein FoFaeC-12213 of Fusarium oxysporum was found to have high amino acid sequence identity with known type C feruloyl esterases (FAEs) containing a 13-amino acid conserved region flanking the characteristic G-X-S-X-G motif of a serine esterase. The putative FAE from the genomic DNA was successfully cloned in frame with the Saccharomyces cerevisiae alpha-factor secretion signal under the transcriptional control of the alcohol oxidase (AOX1) promoter and integrated in Pichia pastoris X-33 to confirm that the enzyme exhibits FAE activity. The molecular weight (62 kDa) and pI (6.8) were in agreement with the theoretical calculated values indicating the correct processing of the secretion signal in P. pastoris. The recombinant FAE was purified to its homogeneity and subsequently characterized using a series of model substrates including methyl esters of hydroxycinnamates, alkyl ferulates and monoferuloylated 4-nitrophenyl glycosides. The substrate specificity profiling reveals that the enzyme is a type C FAE showing broad hydrolytic activity against the four methyl esters of hydroxycinnamic acids and strong preference for the hydrolysis of n-propyl ferulate. Ferulic acid (FA) was efficiently released from destarched wheat bran when the esterase was incubated together with xylanase from Trichoderma longibrachiatum (a maximum of 67% total FA released after 1-h incubation). The esterase showed broad pH stability making it an important candidate for alkaline applications such as pulp treatment in the paper industry.
The potential of the Aspergillus niger type A feruloyl esterase (AnFaeA) for the synthesis of various phenolic acid esters was examined using a ternary-organic reaction system consisting of a mixture of n-hexane, 1- or 2-butanol and water. Reaction parameters including the type of methyl hydroxycinnamate, the composition of the reaction media, the temperature, and the substrate concentration were investigated to evaluate their effect on initial rate and conversion to butyl esters of sinapic acids. Optimisation of the reaction parameters lead to 78% and 9% yield for the synthesis of 1-butyl and 2-butyl sinapate, respectively. For the first time, a feruloyl esterase was introduced in the reaction system as cross-linked enzyme aggregates (CLEAs), after optimisation of the immobilisation procedure, allowing the recycling and reuse of the biocatalyst. The inhibition of copper-induced LDL oxidation by hydroxycinnamic acids and their corresponding butyl esters was investigated in vitro. Kinetic analysis of the antioxidation process demonstrates that sinapate derivatives are effective antioxidants indicating that esterification increases the free acid's antioxidant activity especially on dimethoxylated compounds such as sinapic acid compared to methoxy-hydroxy-compounds such as ferulic acid.
4-Nitrophenyl glycosides of 2-, 3-, and 5-O-(E)-feruloyl- and 2- and 5-O-acetyl-alpha-L-arabinofuranosides and of 2-, 3-, and 4-O-(E)-feruloyl- and 2-, 3- and 4-O-acetyl-beta-D-xylopyranosides, compounds mimicking natural substrates, were used to investigate substrate and positional specificity of type-A, -B, and -C feruloyl esterases. All the feruloyl esterases behave as true feruloyl esterases showing negligible activity on sugar acetates. Type-A enzymes, represented by AnFaeA from Aspergillus niger and FoFaeII from Fusarium oxysporum, are specialized for deferuloylation of primary hydroxyl groups, with a very strong preference for hydrolyzing 5-O-feruloyl-alpha-L-arabinofuranoside. On the contrary, type-B and -C feruloyl esterases, represented by FoFaeI from F. oxysporum and TsFaeC from Talaromyces stipitatus, acted on almost all ferulates with exception of 4- and 3-O-feruloyl-beta-D-xylopyranoside. 5-O-Feruloyl-alpha-L-arabinofuranoside was the best substrate for both TsFaeC and FoFaeI, although catalytic efficiency of the latter enzyme toward 2-O-feruloyl-alpha-L-arabinofuranoside was comparable. In comparison with acetates, the corresponding ferulates served as poor substrates for the carbohydrate esterase family 1 feruloyl esterase from Aspergillus oryzae. The enzyme hydrolyzed all alpha-L-arabinofuranoside and beta-D-xylopyranoside acetates. It behaved as a non-specific acetyl esterase rather than a feruloyl esterase, with a preference for 2-O-acetyl-beta-D-xylopyranoside.
Title: Synergy between xylanases from glycoside hydrolase family 10 and family 11 and a feruloyl esterase in the release of phenolic acids from cereal arabinoxylan Faulds CB, Mandalari G, Lo Curto RB, Bisignano G, Christakopoulos P, Waldron KW Ref: Applied Microbiology & Biotechnology, 71:622, 2006 : PubMed
The bioconversion of waste residues (by-products) from cereal processing industries requires the cooperation of enzymes able to degrade xylanolytic and cellulosic material. The type A feruloyl esterase from Aspergillus niger, AnFaeA, works synergistically with (1-->4)-beta-D-xylopyranosidases (xylanases) to release monomeric and dimeric ferulic acid (FA) from cereal cell wall-derived material. The esterase was more effective with a family 11 xylanase from Trichoderma viride in releasing FA and with a family 10 xylanase from Thermoascus aurantiacus in releasing the 5,5' form of diferulic acid from arabinoxylan (AX) derived from brewers' spent grain. The converse was found for the release of the phenolic acids from wheat bran-derived AXs. This may be indicative of compositional differences in AXs in cereals.
Title: The feruloyl esterase system of Talaromyces stipitatus: determining the hydrolytic and synthetic specificity of TsFaeC Vafiadi C, Topakas E, Christakopoulos P, Faulds CB Ref: J Biotechnol, 125:210, 2006 : PubMed
The active site of the recombinant Talaromyces stipitatus type-C feruloyl esterase (TsFaeC) was probed using a series of C1-C4 alkyl ferulates and methyl esters of phenylalkanoic and cinnamic acids. The enzyme was active on 23 of the 34 substrates tested. Lengthening or shortening the aliphatic side chain while maintaining the same aromatic substitutions completely abolished the enzyme activity. Maintaining the phenylpropenoate structure but altering the substitutions of the aromatic ring demonstrated the importance of hydroxyl groups on meta and/or para position of the benzoic ring. The highest catalytic efficiency of TsFaeC for methyl cinnamates was shown on methyl 3,4-dihydroxy cinnamate and on its hydro form (3,4-dihydroxy-phenyl-propionate). Maintaining the ferulate structure but altering the esterified alkyl group, the comparison of k(cat) and k(cat)/K(m) values showed that the enzyme hydrolysed faster and more efficiently than ethyl ferulate. Alkyl ferulates were applied also for substrate selectivity mapping of feruloyl esterase to catalyze feruloyl group transfer to l-arabinose, using as a reaction system a ternary water-organic mixture consisting of n-hexane, t-butanol and water. The reaction parameters affecting the feruloylation rate and the conversion of the enzymatic synthesis, such as the composition of the reaction media, temperature, substrate and enzyme concentration have been investigated.
Title: Comparison of mesophilic and thermophilic feruloyl esterases: characterization of their substrate specificity for methyl phenylalkanoates Topakas E, Christakopoulos P, Faulds CB Ref: J Biotechnol, 115:355, 2005 : PubMed
The active sites of feruloyl esterases from mesophilic and thermophilic sources were probed using methyl esters of phenylalkanoic acids. Only 13 out of 26 substrates tested were significant substrates for all the enzymes. Lengthening or shortening the aliphatic side chain while maintaining the same aromatic substitutions completely abolished activity for both enzymes, which demonstrates the importance of the correct distance between the aromatic group and the ester bond. Maintaining the phenylpropanoate structure but altering the substitutions of the aromatic ring demonstrated that the type-A esterase from the mesophilic fungus Fusarium oxysporum (FoFaeA) showed a preference for methoxylated substrates, in contrast to the type-B esterase from the same source (FoFaeB) and the thermophilic type-B (StFaeB) and type-C (StFaeC) from Sporotrichum thermophile, which preferred hydroxylated substrates. All four esterases hydrolyzed short chain aliphatic acid (C2-C4) esters of p-nitrophenol, but not the C12 ester of laurate. All the feruloyl esterases were able to release ferulic acid from the plant cell wall material in conjunction with a xylanase, but only the type-A esterase FoFaeA was effective in releasing the 5,5' form of diferulic acid. The thermophilic type-B esterase had a lower catalytic efficiency than its mesophilic counterpart, but released more ferulic acid from plant cell walls.
Title: Purification and characterization of a type B feruloyl esterase (StFAE-A) from the thermophilic fungus Sporotrichum thermophile Topakas E, Stamatis H, Biely P, Christakopoulos P Ref: Applied Microbiology & Biotechnology, 63:686, 2004 : PubMed
A feruloyl esterase (StFAE-A) produced by Sporotrichum thermophile was purified to homogeneity. The purified homogeneous preparation of native StFAE-A exhibited a molecular mass of 57.0+/-1.5 kDa, with a mass of 33+/-1 kDa on SDS-PAGE. The pI of the enzyme was estimated by cation-exchange chromatofocusing to be at pH 3.1. The enzyme activity was optimal at pH 6.0 and 55-60 degrees C. The purified esterase was stable at the pH range 5.0-7.0. The enzyme retained 70% of activity after 7 h at 50 degrees C and lost 50% of its activity after 45 min at 55 degrees C and after 12 min at 60 degrees C. Determination of k(cat)/ K(m) revealed that the enzyme hydrolyzed methyl p-coumarate 2.5- and 12-fold more efficiently than methyl caffeate and methyl ferulate, respectively. No activity on methyl sinapinate was detected. The enzyme was active on substrates containing ferulic acid ester linked to the C-5 and C-2 linkages of arabinofuranose and it hydrolyzed 4-nitrophenyl 5- O- trans-feruloyl-alpha- l-arabinofuranoside (NPh-5-Fe-Ara f) 2-fold more efficiently than NPh-2-Fe-Ara f. Ferulic acid (FA) was efficiently released from destarched wheat bran when the esterase was incubated together with xylanase from S. thermophile (a maximum of 34% total ferulic acid released after 1 h incubation). StFAE-A by itself could release FA, but at a level almost 47-fold lower than that obtained in the presence of xylanase. The potential of StFAE-A for the synthesis of various phenolic acid esters was tested using a ternary water-organic mixture consisting of n-hexane, 1-butanol and water as a reaction system.
Title: Purification and characterization of a feruloyl esterase from Fusarium oxysporum catalyzing esterification of phenolic acids in ternary water-organic solvent mixtures Topakas E, Stamatis H, Biely P, Kekos D, Macris BJ, Christakopoulos P Ref: J Biotechnol, 102:33, 2003 : PubMed
An extracellular feruloyl esterase (FAE-II) from the culture filtrates of Fusarium oxysporum F3 was purified to homogeneity by SP-Sepharose, t-butyl-HIC and Sephacryl S-200 column chromatography. The protein corresponded to molecular mass and pI values of 27 kDa and 9.9, respectively. The enzyme was optimally active at pH 7 and 45 degrees C. The purified esterase was fully stable at pH 7.0-9.0 and temperature up to 45 degrees C after 1 h incubation. Determination of k(cat)/K(m) revealed that the enzyme hydrolysed methyl sinapinate 6, 21 and 40 times more efficiently than methyl ferulate, methyl coumarate and methyl caffeate, respectively. The enzyme was active on substrates containing ferulic acid ester linked to the C-5 but inactive to the C-2 positions of arabinofuranose such as 4-nitrophenyl 5-O-trans-feruloyl-alpha-L-arabinofuranoside and 4-nitrophenyl 2-O-trans-feruloyl-alpha-L-arabinofuranoside. In the presence of Sporotrichum thermophile xylanase, there was a significant release of ferulic acid from destarched wheat bran by FAE-II, indicating a synergistic interaction between FAE-II and S. thermophile xylanase. FAE-II by itself could release only little ferulic acid from destarched wheat bran. The potential of FAE-II for the synthesis of various phenolic acid esters was tested using as a reaction system a surfactantless microemulsion formed in ternary mixture consisting of n-hexane, 1-propanol and water.
An extracellular feruloyl esterase (FoFAE-I) from the culture filtrates of Fusarium oxysporum F3 was purified to homogeneity by ion-exchange, hydrophobic interaction and gel filtration chromatographies. The protein corresponded to molecular mass and pI values of 31kDa and 9.5, respectively. The enzyme was optimally active at pH 7.0 and 55C. The purified esterase was fully stable at pH 7.0-9.0 and temperature up to 30C. Determination of kcat/Km revealed that the enzyme hydrolysed methyl p-coumarate (MpCA) 4.5, 9, and 239 times more efficiently than methyl caffeate (MCA), methyl ferulate (MFA) and methyl sinapinate (MSA), respectively. The enzyme was active on substrates containing ferulic acid ester linked to the C-5 and C-2 linkages of arabinofuranose but showed preference for the ester at position 2. 4-Nitrophenyl-2-O-trans-feruloyl--l-arabinofuranoside (NPh-5-Fe-Araf) was hydrolysed 100 times more efficiently than 4-nitrophenyl-5-O-trans-feruloyl--l-arabinofuranoside (NPh-2-Fe-Araf). Ferulic acid (FA) was efficiently released from destarched wheat bran (DSWB) when the esterase was incubated together with xylanase from Sporotrichum thermophile (a maximum of 92% total ferulic acid released after 4h incubation). FoFAE-I by itself could release FA but at a level almost five-fold lower than that obtained in the presence of xylanase. The potential of FAE-I for the synthesis of various phenolic acid esters was tested using as a reaction system a surfactantless microemulsions formed in ternary mixture consisting of n-hexane, 1-butanol and water.
Sulfite dissolving pulp from Eucalyptus grandis contained approximately 3.8% O-acetyl-4-O-methylglucuronoxylan with a molar ratio of xylose:4-O-methylglucuronic acid:acetyl group close to 13.6:1:6.2. The effects produced by purified endo-xylanases from two different glycosyl hydrolase families (family 10 and 11) as well as acetyl xylan esterases were examined and assessed on pulp in relation to their bleaching abilities. The purified endo-xylanases hydrolyzed only a limited portion (less than 30%) of the acetylglucuronoxylan present in the pulp. The enzymes of family 10 produced acetylated xylobiose and xylotriose whereas acetylated xylobiose was not observed among the products released from the pulp by the family 11 xylanases. The esterases however were not capable of deacetylating the acetylated aldouronic acids generated by the xylanases. Regardless of the different mode of action of the endo-xylanases on dissolving pulp, their effect on pulp bleaching was not related to the amount and nature of sugars generated or the glycosyl hydrolase family. No additional brightness gain was obtained when endo-xylanases were used in conjunction with acetyl xylan esterases, suggesting that the latter do not play an important role in biobleaching of eucalypt sulfite dissolving pulps.
Cell-bound lipase activity (10 pNPL units/g dry cell weight) was released when the yeast Rhodotorula glutinis was cultured in a 7-l stirred tank fermentor using palm-oil as the sole carbon source. The enzyme showed relative specificity towards medium chain organic acids since the apparent K(m) values for pNPB (p-NitroPhenyl-Butyrate) and pNPL (p-NitroPhenyl-Laurate) were equal to 2.7 and 0.7 mM, respectively. In addition, 80% of this activity could be detected on the surface of the cells. The cell-bound nature of the enzyme increased its thermal stability showing half-life times of 200 and 60 min at 50 and 60 degrees C, respectively, as well as good stability in organic solvents. Freeze-dried cell preparations were successfully used to catalyze the synthesis of fatty acid esters of butanol and heptanol in nearly anhydrous organic solvents. A conversion of 60-62% was obtained upon esterification of palmitic or oleic acid with butanol, within 96 h. The enzyme preparation was used in four consecutive batch reactions with only 10% loss of activity.
