Acetyl xylan esterase (AXE) catalyzes the hydrolysis of the acetyl bonds present in plant cell wall polysaccharides. Here, we determined the crystal structure of AXE from Aspergillus luchuensis (AlAXEA), providing the three-dimensional structure of an enzyme in the Esterase_phb family. AlAXEA shares its core alpha/beta-hydrolase fold structure with esterases in other families, but it has an extended central beta-sheet at both its ends and an extra loop. Structural comparison with a ferulic acid esterase (FAE) from Aspergillus niger indicated that AlAXEA has a conserved catalytic machinery: a catalytic triad (Ser119, His259, and Asp202) and an oxyanion hole (Cys40 and Ser120). Near the catalytic triad of AlAXEA, two aromatic residues (Tyr39 and Trp160) form small pockets at both sides. Homology models of fungal FAEs in the same Esterase_phb family have wide pockets at the corresponding sites because they have residues with smaller side chains (Pro, Ser, and Gly). Mutants with site-directed mutations at Tyr39 showed a substrate specificity similar to that of the wild-type enzyme, whereas those with mutations at Trp160 acquired an expanded substrate specificity. Interestingly, the Trp160 mutants acquired weak but significant type B-like FAE activity. Moreover, the engineered enzymes exhibited ferulic acid-releasing activity from wheat arabinoxylan.IMPORTANCE Hemicelluloses in the plant cell wall are often decorated by acetyl and ferulic acid groups. Therefore, complete and efficient degradation of plant polysaccharides requires the enzymes for cleaving the side chains of the polymer. Since the Esterase_phb family contains a wide array of fungal FAEs and AXEs from fungi and bacteria, our study will provide a structural basis for the molecular mechanism of these industrially relevant enzymes in biopolymer degradation. The structure of the Esterase_phb family also provides information for bacterial polyhydroxyalkanoate depolymerases that are involved in biodegradation of thermoplastic polymers.
Two thermophilic bacterial strains, Bacillus thermoamylovorans NB501 and NB502, were isolated from a high-temperature aerobic fermentation reactor system that processes tofu refuse (okara) in the presence of used soybean oil. We cloned a lipase gene from strain NB501, which secretes a thermophilic lipase. The biochemical characteristics of the recombinant enzyme (Lip501r) were elucidated. Lip501r is monomeric in solution with an apparent molecular mass of 38 kDa on SDS-PAGE. The optimal pH and apparent optimal temperature of Lip501r were 8 and 60 degrees C, respectively. Supplementation of 5 mM Ca(2+) enhanced the thermostability, and the enzyme retained 56% of its activity for 30 min at 50 degrees C. Lip501r was active on a wide range of substrates with different lengths of p-nitrophenyl (pNP) esters, and showed a remarkably higher activity with pNP-myristate. The Km and Vmax values for pNP-butyrate in the presence of 5 mM CaCl2 were 1.8 mM and 220 units/mg, respectively. The possible industrial use of the thermophilic lipase in modifying edible oil was explored by examining the degradation of soybean oil. A TLC analysis of the degraded products indicated that Lip501r is an 1,3-position specific lipase. A homology modeling study revealed that helix alpha6 in the lid domain of NB501 lipase was shorter than that of lipases from the Geobacillus group.
Feruloyl esterase (FAE) catalyzes the hydrolysis of the ferulic and diferulic acids present in plant cell wall polysaccharides, and tannase catalyzes the hydrolysis of tannins to release gallic acid. The fungal tannase family in the ESTHER database contains various enzymes, including FAEs and tannases. Despite the importance of FAEs and tannases in bioindustrial applications, three-dimensional structures of the fungal tannase family members have been unknown. Here, we determined the crystal structure of FAE B from Aspergillus oryzae (AoFaeB), which belongs to the fungal tannase family, at 1.5 A resolution. AoFaeB consists of a catalytic alpha/beta-hydrolase fold domain and a large lid domain, and the latter has a novel fold. To estimate probable binding models of substrates in AoFaeB, an automated docking analysis was performed. In the active site pocket of AoFaeB, residues responsible for the substrate specificity of the FAE activity were identified. The catalytic triad of AoFaeB comprises Ser203, Asp417, and His457, and the serine and histidine residues are directly connected by a disulfide bond of the neighboring cysteine residues, Cys202 and Cys458. This structural feature, the "CS-D-HC motif," is unprecedented in serine hydrolases. A mutational analysis indicated that the novel structural motif plays essential roles in the function of the active site. Proteins 2014; 82:2857-2867. (c) 2014 Wiley Periodicals, Inc.
Feruloyl esterases hydrolyze the ester linkages of ferulic and diferulic acids present in plant cell walls. This interesting group of enzymes also has a potentially broad range of applications in the pharmaceutical and agri-food industries. An overview of the current knowledge of fungal feruloyl esterases focusing on the diverse of substrate specificity and potential applications is presented in this review. Furthermore, biological functions of ferulic acid are discussed.
        
Title: Characterization of a thermostable carboxylesterase from the hyperthermophilic bacterium Thermotoga maritima Kakugawa S, Fushinobu S, Wakagi T, Shoun H Ref: Applied Microbiology & Biotechnology, 74:585, 2007 : PubMed
The gene encoding carboxylesterase from the hyperthermophilic bacterium Thermotoga maritima (tm0053) was cloned. The recombinant protein (EST53) was overexpressed in Escherichia coli without its NH(2)-terminal hydrophobic region, and with a C-terminal hexahistidine sequence. The enzyme was purified to homogeneity by heat treatment, followed by Ni(2+) affinity chromatography, and then characterized. Among the p-nitrophenyl esters tested, the best substrate was p-nitrophenyl decanoate with K (m) and k (cat) values of 3.1 muM and 10.8 s(-1), respectively, at 60 degrees C and pH 7.5. The addition of O,O'-bis(2-aminoethyl)ethyleneglycol-N,N,N',N'-tetraacetic acid decreased the esterase activity, indicating that EST53 is dependent on the presence of Ca(2+) ion. In addition, its activity was inhibited by the addition of phenylmethylsulfonyl fluoride and diethyl pyrocarbonate, indicating that it contains serine and histidine residues, which play key roles in the catalytic mechanism. EST53 shows a relatively high degree of similarity to Burkholderia lipases that belong to family I.2 of the lipolytic enzymes, whereas the local sequence around the pentapeptide of EST53 is most similar to those of Bacillus lipases belonging to family I.4.
        
Title: Improving the catalytic efficiency of a meta-cleavage product hydrolase (CumD) from Pseudomonas fluorescens IP01 Jun SY, Fushinobu S, Nojiri H, Omori T, Shoun H, Wakagi T Ref: Biochimica & Biophysica Acta, 1764:1159, 2006 : PubMed
The meta-cleavage product hydrolase from Pseudomonas fluorescens IP01 (CumD) hydrolyzes 2-hydroxy-6-oxo-7-methylocta-2,4-dienoate (6-isopropyl HODA) in the cumene (isopropylbenzene) degradation pathway. To modulate the substrate specificity and catalytic efficiency of CumD toward substrates derived from monocyclic aromatic compounds, we constructed the CumD mutants, A129V, I199V, and V227I, as well as four types of double and triple mutants. Toward substrates with smaller side chains (e.g. 2-hydroxy-6-oxohepta-2,4-dienoate; 6-ethyl-HODA), the k(cat)/K(m) values of the single mutants were 4.2-11 fold higher than that of the wild type enzyme and 1.8-4.7 fold higher than that of the meta-cleavage product hydrolase from Pseudomonas putida F1 (TodF). The A129V mutant showed the highest k(cat)/K(m) value for 2-hydroxy-6-oxohepta-2,4-dienoate (6-ethyl-HODA). The crystal structure of the A129V mutant was determined at 1.65 A resolution, enabling location of the Ogamma atom of the Ser103 side chain. A chloride ion was bound to the oxyanion hole of the active site, and mutant enzymes at the residues forming this site were also examined. The k(cat) values of Ser34 mutants were decreased 2.9-65 fold, suggesting that the side chain of Ser34 supports catalysis by stabilizing the anionic oxygen of the proposed intermediate state (gem-diolate). This is the first crystal structure determination of CumD in an active form, with the Ser103 residue, one of the catalytically essential "triad", being intact.
        
Title: A series of crystal structures of a meta-cleavage product hydrolase from Pseudomonas fluorescens IP01 (CumD) complexed with various cleavage products Fushinobu S, Jun SY, Hidaka M, Nojiri H, Yamane H, Shoun H, Omori T, Wakagi T Ref: Biosci Biotechnol Biochem, 69:491, 2005 : PubMed
Meta-cleavage product hydrolase (MCP-hydrolase) is one of the key enzymes in the microbial degradation of aromatic compounds. MCP-hydrolase produces 2-hydroxypenta-2,4-dienoate and various organic acids, according to the C6 substituent of the substrate. Comprehensive analysis of the substrate specificity of the MCP-hydrolase from Pseudomonas fluorescens IP01 (CumD) was carried out by determining the kinetic parameters for nine substrates and crystal structures complexed with eight cleavage products. CumD preferred substrates with long non-branched C6 substituents, but did not effectively hydrolyze a substrate with a phenyl group. Superimposition of the complex structures indicated that benzoate was bound in a significantly different direction than other aliphatic cleavage products. The directions of the bound organic acids appeared to be related with the k(cat) values of the corresponding substrates. The Ile139 and Trp143 residues on helix alpha4 appeared to cause steric hindrance with the aromatic ring of the substrate, which hampers base-catalyzed attack by water.
We cloned the feruloyl esterase A gene from Aspergillus awamori (AwfaeA) and engineered it to study substrate specificity and pH dependence of catalysis. Based on the crystal structures of two type-A feruloyl esterases (FAE-III and AnFAEA) from Aspergillus niger, residues located in the flap region of AwFAEA (Asp71, Thr72, Asp77, and Tyr80) were replaced with corresponding amino acid residues (Ile, Arg, Asn, and Phe), respectively, found in the lid of lipases from Rhizomucor miehei (RmLIP) and Humicola lanuginose (HlLIP). Furthermore, Asp77 of AwFAEA, which is conserved in Aspergillus FAEs and lipases, was replaced with a hydrophobic residue (Ile). Kinetic analysis of the mutant enzymes showed that the higher catalytic efficiency of the D77I and Y80F mutants toward alpha-naphthylbutyrate (C4) and alpha-naphthylcaprylate (C8), respectively, was due to a lower K(m) value. The higher catalytic efficiency of D77N toward C4 substrate was due to a combination of decreased K(m) and considerably increased k(cat). The D71I and Y80F mutants showed some activity toward long-acyl chain esters. On the other hand, the D77I mutant had no detectable activity toward phenolic acid methyl esters and feruloylated arabinoxylan. Moreover, the pH optima of the D77I, D77N, and Y80F mutants increased from 5.0 to 7.0-8.0, 7.0, and 6.0, respectively.
        
Title: Biochemical characterization of recombinant acetyl xylan esterase from Aspergillus awamori expressed in Pichia pastoris: mutational analysis of catalytic residues Koseki T, Miwa Y, Fushinobu S, Hashizume K Ref: Biochimica & Biophysica Acta, 1749:7, 2005 : PubMed
We engineered an acetyl xylan esterase (AwaxeA) gene from Aspergillus awamori into a heterologous expression system in Pichia pastoris. Purified recombinant AwAXEA (rAwAXEA) displayed the greatest hydrolytic activity toward alpha-naphthylacetate (C2), lower activity toward alpha-naphthylpropionate (C3) and no detectable activity toward acyl-chain substrates containing four or more carbon atoms. Putative catalytic residues, Ser(119), Ser(146), Asp(168) and Asp(202), were substituted for alanine by site-directed mutagenesis. The biochemical properties and kinetic parameters of the four mutant enzymes were examined. The S119A and D202A mutant enzymes were catalytically inactive, whereas S146A and D168A mutants displayed significant hydrolytic activity. These observations indicate that Ser(119) and Asp(202) are important for catalysis. The S146A mutant enzyme showed lower specific activity toward the C2 substrate and higher thermal stability than wild-type enzyme. The lower activity of S146A was due to a combination of increased K(m) and decreased k(cat). The catalytic efficiency of S146A was 41% lower than that of wild-type enzyme. The synthesis of ethyl acetate was >10-fold than that of ethyl n-hexanoate synthesis for the wild-type, S146A and D168A mutant enzymes. However, the D202A showed greater synthetic activity of ethyl n-hexanoate as compared with the wild-type and other mutants.
2-Hydroxy-6-oxo-6-(2(')-aminophenyl)-hexa-2,4-dienoate hydrolases (CarC enzymes) from two carbazole-degrading bacteria were purified using recombinant Escherichia coli strains with the histidine (His)-tagged purification system. The His-tagged CarC (ht-CarC) enzymes from Pseudomonas resinovorans strain CA10 (ht-CarC(CA10)) and Janthinobacterium sp. strain J3 (ht-CarC(J3)) exhibited hydrolase activity toward 2-hydroxy-6-oxo-6-phenylhexa-2,4-dienoate as the purified native CarC(CA10) did. ht-CarC(J3) was crystallized in the space group I422 with cell dimensions of a=b=130.3A, c=84.5A in the hexagonal setting, and the crystal structure of ht-CarC(J3) was determined at 1.86A resolution. The final refined model of ht-CarC(J3) yields an R-factor of 21.6%, although the electron-density corresponding to Ile146 to Asn155 was ambiguous in the final model. We compared the known structures of BphD from Rhodococcus sp. strain RHA1 and CumD from Pseudomonas fluorescens strain IP01. The backbone conformation of ht-CarC(J3) was better superimposed with CumD than with BphD(RHA1). The side-chain directions of Arg185 and Trp262 residues in the substrate binding pockets of these enzymes were different among these proteins, suggesting that these residues may take a conformational change during the catalytic cycles.
2-Hydroxy-6-oxo-7-methylocta-2,4-dienoate hydrolase (CumD) from Pseudomonas fluorescens IP01 hydrolyzes a meta-cleavage product generated in the cumene (isopropylbenzene) degradation pathway. The crystal structures of the inactive S103A mutant of the CumD enzyme complexed with isobutyrate and acetate ions were determined at 1.6 and 2.0 A resolution, respectively. The isobutyrate and acetate ions were located at the same position in the active site, and occupied the site for a part of the hydrolysis product with CumD, which has the key determinant group for the substrate specificity of related hydrolases. One of the oxygen atoms of the carboxyl group of the isobutyrate ion was hydrogen bonded with a water molecule and His252. Another oxygen atom of the carboxyl group was situated in an oxyanion hole formed by the two main-chain N atoms. The isopropyl group of the isobutyric acid was recognized by the side-chains of the hydrophobic residues. The substrate-binding pocket of CumD was long, and the inhibition constants of various organic acids corresponded well to it. In comparison with the structure of BphD from Rhodococcus sp. RHA1, the structural basis for the substrate specificity of related hydrolases, is revealed.