Family Report for: 6_AlphaBeta_hydrolase

alpha/beta Hydrolase fold proteins are an important, diverse, widespread group of enzymes not yet fully exploited by structural biologists. We describe the current state of knowledge of this family, and suggest a smaller definition of the required core and some possible future avenues of exploration.

The alpha/beta hydrolase fold is a typical example of a tertiary fold adopted by proteins that have no obvious sequence similarity, but nevertheless, in the course of evolution, diverged from a common ancestor. Recently solved structures demonstrate a considerably increased variability in fold architecture and substrate specificity, necessitating the redefinition of the minimal features that distinguish the family.

We have identified a new protein fold--the alpha/beta hydrolase fold--that is common to several hydrolytic enzymes of widely differing phylogenetic origin and catalytic function. The core of each enzyme is similar: an alpha/beta sheet, not barrel, of eight beta-sheets connected by alpha-helices. These enzymes have diverged from a common ancestor so as to preserve the arrangement of the catalytic residues, not the binding site. They all have a catalytic triad, the elements of which are borne on loops which are the best-conserved structural features in the fold. Only the histidine in the nucleophile-histidine-acid catalytic triad is completely conserved, with the nucleophile and acid loops accommodating more than one type of amino acid. The unique topological and sequence arrangement of the triad residues produces a catalytic triad which is, in a sense, a mirror-image of the serine protease catalytic triad. There are now four groups of enzymes which contain catalytic triads and which are related by convergent evolution towards a stable, useful active site: the eukaryotic serine proteases, the cysteine proteases, subtilisins and the alpha/beta hydrolase fold enzymes.

A new carboxyl esterase, AF-Est2, from the hyperthermophilic archaeon Archaeoglobus fulgidus has been cloned, over-expressed in Escherichia coli and biochemically and structurally characterized. The enzyme has high activity towards short- to medium-chain p-nitrophenyl carboxylic esters with optimal activity towards the valerate ester. The AF-Est2 has good solvent and pH stability and is very thermostable, showing no loss of activity after incubation for 30 min at 80 degrees C. The 1.4 A resolution crystal structure of AF-Est2 reveals Coenzyme A (CoA) bound in the vicinity of the active site. Despite the presence of CoA bound to the AF-Est2 this enzyme has no CoA thioesterase activity. The pantetheine group of CoA partially obstructs the active site alcohol pocket suggesting that this ligand has a role in regulation of the enzyme activity. A comparison with closely related alpha/beta hydrolase fold enzyme structures shows that the AF-Est2 has unique structural features that allow CoA binding. A comparison of the structure of AF-Est2 with the human carboxyl esterase 1, which has CoA thioesterase activity, reveals that CoA is bound to different parts of the core domain in these two enzymes and approaches the active site from opposite directions.

Thermogutta terrifontis esterase (TtEst), a carboxyl esterase identified in the novel thermophilic bacterium T. terrifontis from the phylum Planctomycetes, has been cloned and over-expressed in Escherichia coli. The enzyme has been characterized biochemically and shown to have activity towards small p-nitrophenyl (pNP) carboxylic esters, with optimal activity for pNP-propionate. The enzyme retained 95% activity after incubation for 1 h at 80 degrees C. The crystal structures of the native TtEst and its complexes with the substrate analogue d-malate and the product acetate have been determined to high resolution. The bound ligands have allowed the identification of the carboxyl and alcohol binding pockets in the enzyme active site. Comparison of TtEst with structurally related enzymes provides insight into how differences in their catalytic activity can be rationalized based upon the properties of the amino acid residues in their active site pockets. The mutant enzymes L37A and L251A have been constructed to extend the substrate range of TtEst towards the larger butyrate and valerate pNP-esters. These mutant enzymes have also shown a significant increase in activity towards acetate and propionate pNP esters. A crystal structure of the L37A mutant was determined with the butyrate product bound in the carboxyl pocket of the active site. The mutant structure shows an expansion of the pocket that binds the substrate carboxyl group, which is consistent with the observed increase in activity towards pNP-butyrate. DATABASE: The GenBank sequence accession number for the Thermogutta terrifontis esterase is KR002593. The protein structures for T. terrifontis esterase and their complexes have been deposited in the Protein Data Bank with codes: 4UHC (native), 4UHD (acetate bound), 4UHE (malate bound) and 4UHF (L37A mutant with butyrate bound).

The yeast peroxisomal hydrolase Lpx1 belongs to the alpha/beta-hydrolase superfamily. In the absence of Lpx1, yeast peroxisomes show an aberrant vacuolated morphology similar to what is found in peroxisomal disorder patients. Here, we present the crystal structure of Lpx1 determined at a resolution of 1.9 A. The structure reveals the complete catalytic triad with an unusual location of the acid residue after strand beta6 of the canonical alpha/beta-hydrolase fold. A four-helix cap domain covers the active site. The interface between the alpha/beta-hydrolase core and the cap domain forms the potential substrate binding site, which may also comprise the tunnel that leads into the protein interior and widens into a cavity. Two further tunnels connect the active site to the protein surface, potentially facilitating substrate access. Lpx1 is a homodimer. The alpha/beta-hydrolase core folds of the two protomers form the dimer contact site. Further dimerization contacts arise from the mutual embracement of the cap domain of one protomer by the non-canonical C-terminal helix of the other, resulting in a total buried surface area of some 6000 A(2). The unusual C-terminal helix sticks out from the core fold to which it is connected by an extended flexible loop. We analyzed whether this helix is required for dimerization and for import of the dimer into peroxisomes using biochemical assays in vitro and a microscopy-based interaction assay in mammalian cells. Surprisingly, the C-terminal helix is dispensable for dimerization and dimer import. The unusually robust self-interaction suggests that Lpx1 is imported into peroxisomes as dimer.

The release of polysaccharide from the plant cell wall is a key process to release the stored energy from plant biomass. Within the ruminant digestive system, a host of commensal microorganisms speed the breakdown of plant cell matter releasing fermentable sugars. The presence of phenolic compounds, most notably ferulic acid (FA), esterified within the cell wall is thought to pose a significant impediment to the degradation of the plant cell wall. The structure of a FA esterase from the ruminant bacterium Butyrivibrio proteoclasticus has been determined in two different space groups, in both the apo-form, and the ligand bound form with FA located in the active site. The structure reveals a new lid domain that has no structural homologues in the PDB. The flexibility of the lid domain is evident by the presence of three different conformations adopted by different molecules in the crystals. In the FA-bound structures, these conformations show sequential binding and closing of the lid domain over the substrate. Enzymatic activity assays demonstrate a broad activity against plant-derived hemicellulose, releasing at least four aromatic compounds including FA, coumaric acid, coumarin-3-carboxylic acid, and cinnamic acid. The rumen is a complex ecosystem that efficiently degrades plant biomass and the genome of B. proteoclasticus contains greater than 130 enzymes, which are potentially involved in this process of which Est1E is the first to be well characterized.

Mycobacterium tuberculosis, the cause of tuberculosis, is a devastating human pathogen against which new drugs are urgently needed. Enzymes from the biosynthetic pathway for menaquinone are considered to be valid drug targets. The protein encoded by the open reading frame Rv0554 has been expressed, purified and subjected to structural and functional analysis to test for a putative role in menaquinone biosynthesis. The crystal structure of Rv0554 has been solved and refined in two different space groups at 2.35 and 1.9 A resolution. The protein is dimeric, with an alpha/beta-hydrolase monomer fold. In each monomer, a large cavity adjacent to the catalytic triad is enclosed by a helical lid. Dimerization is mediated by the lid regions. Small-molecule additives used in crystallization bind in the active site, but no binding of ligands related to menaquinone biosynthesis could be detected and functional assays failed to support possible roles in menaquinone biosynthesis.

Several crystal structures of AFL, a novel lipase from the archaeon Archaeoglobus fulgidus, complexed with various ligands, have been determined at about 1.8 A resolution. This enzyme has optimal activity in the temperature range of 70-90 degrees C and pH 10-11. AFL consists of an N-terminal alpha/beta-hydrolase fold domain, a small lid domain, and a C-terminal beta-barrel domain. The N-terminal catalytic domain consists of a 6-stranded beta-sheet flanked by seven alpha-helices, four on one side and three on the other side. The C-terminal lipid binding domain consists of a beta-sheet of 14 strands and a substrate covering motif on top of the highly hydrophobic substrate binding site. The catalytic triad residues (Ser136, Asp163, and His210) and the residues forming the oxyanion hole (Leu31 and Met137) are in positions similar to those of other lipases. Long-chain lipid is located across the two domains in the AFL-substrate complex. Structural comparison of the catalytic domain of AFL with a homologous lipase from Bacillus subtilis reveals an opposite substrate binding orientation in the two enzymes. AFL has a higher preference toward long-chain substrates whose binding site is provided by a hydrophobic tunnel in the C-terminal domain. The unusually large interacting surface area between the two domains may contribute to thermostability of the enzyme. Two amino acids, Asp61 and Lys101, are identified as hinge residues regulating movement of the lid domain. The hydrogen-bonding pattern associated with these two residues is pH dependent, which may account for the optimal enzyme activity at high pH. Further engineering of this novel lipase with high temperature and alkaline stability will find its use in industrial applications.

In all sequenced genomes, a large fraction of predicted genes encodes proteins of unknown biochemical function and up to 15% of the genes with "known" function are mis-annotated. Several global approaches are routinely employed to predict function, including sophisticated sequence analysis, gene expression, protein interaction, and protein structure. In the first coupling of genomics and enzymology, Phizicky and colleagues undertook a screen for specific enzymes using large pools of partially purified proteins and specific enzymatic assays. Here we present an overview of the further developments of this approach, which involve the use of general enzymatic assays to screen individually purified proteins for enzymatic activity. The assays have relaxed substrate specificity and are designed to identify the subclass or sub-subclasses of enzymes (phosphatase, phosphodiesterase/nuclease, protease, esterase, dehydrogenase, and oxidase) to which the unknown protein belongs. Further biochemical characterization of proteins can be facilitated by the application of secondary screens with natural substrates (substrate profiling). We demonstrate here the feasibility and merits of this approach for hydrolases and oxidoreductases, two very broad and important classes of enzymes. Application of general enzymatic screens and substrate profiling can greatly speed up the identification of biochemical function of unknown proteins and the experimental verification of functional predictions produced by other functional genomics approaches.

The alpha/beta-hydrolase fold is characterized by a beta-sheet core of five to eight strands connected by alpha-helices to form a alpha/beta/alpha sandwich. In most of the family members the beta-strands are parallels, but some show an inversion in the order of the first strands, resulting in antiparallel orientation. The members of the superfamily diverged from a common ancestor into a number of hydrolytic enzymes with a wide range of substrate specificities, together with other proteins with no recognized catalytic activity. In the enzymes the catalytic triad residues are presented on loops, of which one, the nucleophile elbow, is the most conserved feature of the fold. Of the other proteins, which all lack from one to all of the catalytic residues, some may simply be 'inactive' enzymes while others are known to be involved in surface recognition functions. The ESTHER database (http:\/\/bioweb.supagro.inra.fr/esther) gathers and annotates all the published information related to gene and protein sequences of this superfamily, as well as biochemical, pharmacological and structural data, and connects them so as to provide the bases for studying structure-function relationships within the family. The most recent developments of the database, which include a section on human diseases related to members of the family, are described.

alpha/beta Hydrolase fold proteins are an important, diverse, widespread group of enzymes not yet fully exploited by structural biologists. We describe the current state of knowledge of this family, and suggest a smaller definition of the required core and some possible future avenues of exploration.

The alpha/beta hydrolase fold is a typical example of a tertiary fold adopted by proteins that have no obvious sequence similarity, but nevertheless, in the course of evolution, diverged from a common ancestor. Recently solved structures demonstrate a considerably increased variability in fold architecture and substrate specificity, necessitating the redefinition of the minimal features that distinguish the family.

We have identified a new protein fold--the alpha/beta hydrolase fold--that is common to several hydrolytic enzymes of widely differing phylogenetic origin and catalytic function. The core of each enzyme is similar: an alpha/beta sheet, not barrel, of eight beta-sheets connected by alpha-helices. These enzymes have diverged from a common ancestor so as to preserve the arrangement of the catalytic residues, not the binding site. They all have a catalytic triad, the elements of which are borne on loops which are the best-conserved structural features in the fold. Only the histidine in the nucleophile-histidine-acid catalytic triad is completely conserved, with the nucleophile and acid loops accommodating more than one type of amino acid. The unique topological and sequence arrangement of the triad residues produces a catalytic triad which is, in a sense, a mirror-image of the serine protease catalytic triad. There are now four groups of enzymes which contain catalytic triads and which are related by convergent evolution towards a stable, useful active site: the eukaryotic serine proteases, the cysteine proteases, subtilisins and the alpha/beta hydrolase fold enzymes.