Gene_locus Report for: rhidl-lipas

Rhizopus oryzae lipase (ROL) is one of the most important enzymes used in the food, biofuel, and pharmaceutical industries. However, the highly demanding conditions of industrial processes can reduce its stability and activity. To seek a feasible method to improve both the catalytic activity and the thermostability of this lipase, first, the structure of ROL was divided into catalytic and noncatalytic regions by identifying critical amino acids in the crevice-like binding pocket. Second, a mutant screening library aimed at improvement of ROL catalytic performance by virtual saturation mutagenesis of residues in the catalytic region was constructed based on Rosetta's Cartesian_ddg protocol. A double mutant, E265V/S267W (with an E-to-V change at residue 265 and an S-to-W change at residue 267), with markedly improved catalytic activity toward diverse chain-length fatty acid esters was identified. Then, computational design of disulfide bonds was conducted for the noncatalytic amino acids of E265V/S267W, and two potential disulfide bonds, S61C-S115C and E190C-E238C, were identified as candidates. Experimental data validated that the variant E265V/S267W/S61C-S115C/E190C-E238C had superior stability, with an increase of 8.5 degreesC in the melting temperature and a half-life of 31.7 min at 60 degreesC, 4.2-fold longer than that of the wild-type enzyme. Moreover, the variant improved the lipase activity toward five 4-nitrophenyl esters by 1.5 to 3.8 times, exhibiting a potential to modify the catalytic efficiency. IMPORTANCE Rhizopus oryzae lipase (ROL) is very attractive in biotechnology and industry as a safe and environmentally friendly biocatalyst. Functional expression of ROL in Escherichia coli facilitates effective high-throughput screening for positive variants. This work highlights a method to improve both selectivity and thermostability based on a combination of virtual saturation mutagenesis in the substrate pocket and disulfide bond prediction in the noncatalytic region. Using the method, ROL thermostability and activity to diverse 4-nitrophenyl esters could be substantially improved. The strategy of rational introduction of multiple mutations in different functional domains of the enzyme is a great prospect in the modification of biocatalysts.

A lipase from Rhizopus oryzae DSM 853 (ROL) was cloned from a chromosomal gene bank, sequenced and overexpressed in Escherichia coli. ROL and its precursors ProROL and PreProROL were purified and their pH and temperature profile was determined. In contrast to ROL, ProROL and PreProROL had considerably higher thermostability and a slightly higher pH optimum. Moreover, it could be demonstrated by in vitro experiments that the natural leader sequence of ROL is able to inhibit the folding supporting properties of the prosequence, resulting in a retardation of folding. In addition, there is strong evidence that all different lipase forms derived from Rhizopus sp. described in the literature are a result of different proteolytic processing and originate from the same gene.

A lambda gt11 cDNA library was constructed in Escherichia coli using poly(A)-selected mRNA from the fungus, Rhizopus (Rp.) delemar. Lipase-producing members of the library were identified by means of a phenotypic score wherein the release of fatty acids by lipase causes a characteristic color change in the growth medium. One such isolate contained a 1287-bp insert (LIP cDNA) which hybridizes to 1.25- to 1.35-kb mRNA species from Rp. delemar. The lipase produced in E. coli containing the LIP cDNA exhibits the same substrate selectivity as the authentic fungal enzyme, hydrolyzing ester bonds at the stereospecific numbering (sn) sn-1 and sn-3, but not the sn-2, positions of triglycerides. The complete nucleotide sequence of the LIP cDNA was determined. By reference to the N-terminal sequence of authentic Rp. delemar lipase, the lipase-encoding region was identified within this fragment. The LIP cDNA encodes a putative preprolipase consisting of a 26-amino-acid(aa) signal sequence, a 97-aa propeptide, and a 269-aa mature enzyme. The predicted mature lipase has the same molecular weight and aa composition as that of Rp. delemar, is highly homologous to that produced by the fungus Rhizomucor miehei, and contains the consensus pentapeptide (Gly-Xaa-Ser-Yaa-Gly) which is conserved among lipolytic enzymes. It is concluded that the LIP cDNA is an essentially full-length analogue of the lipase-encoding gene of Rp. delemar. The lipase encoded by the LIP cDNA occupies a cytoplasmic location when synthesized in E. coli. Unprocessed forms of the lipase accumulate in E. coli.

Rhizopus oryzae lipase (ROL) is one of the most important enzymes used in the food, biofuel, and pharmaceutical industries. However, the highly demanding conditions of industrial processes can reduce its stability and activity. To seek a feasible method to improve both the catalytic activity and the thermostability of this lipase, first, the structure of ROL was divided into catalytic and noncatalytic regions by identifying critical amino acids in the crevice-like binding pocket. Second, a mutant screening library aimed at improvement of ROL catalytic performance by virtual saturation mutagenesis of residues in the catalytic region was constructed based on Rosetta's Cartesian_ddg protocol. A double mutant, E265V/S267W (with an E-to-V change at residue 265 and an S-to-W change at residue 267), with markedly improved catalytic activity toward diverse chain-length fatty acid esters was identified. Then, computational design of disulfide bonds was conducted for the noncatalytic amino acids of E265V/S267W, and two potential disulfide bonds, S61C-S115C and E190C-E238C, were identified as candidates. Experimental data validated that the variant E265V/S267W/S61C-S115C/E190C-E238C had superior stability, with an increase of 8.5 degreesC in the melting temperature and a half-life of 31.7 min at 60 degreesC, 4.2-fold longer than that of the wild-type enzyme. Moreover, the variant improved the lipase activity toward five 4-nitrophenyl esters by 1.5 to 3.8 times, exhibiting a potential to modify the catalytic efficiency. IMPORTANCE Rhizopus oryzae lipase (ROL) is very attractive in biotechnology and industry as a safe and environmentally friendly biocatalyst. Functional expression of ROL in Escherichia coli facilitates effective high-throughput screening for positive variants. This work highlights a method to improve both selectivity and thermostability based on a combination of virtual saturation mutagenesis in the substrate pocket and disulfide bond prediction in the noncatalytic region. Using the method, ROL thermostability and activity to diverse 4-nitrophenyl esters could be substantially improved. The strategy of rational introduction of multiple mutations in different functional domains of the enzyme is a great prospect in the modification of biocatalysts.

1,3-regiospecific lipases are important enzymes that are heavily utilized in the food industries to produce structured triacylglycerols (TAGs). The Rhizopus oryzae lipase (ROL) has recently gained interest because this enzyme possesses high selectivity and catalytic efficiency. However, its low thermostability limits its use towards reactions that work at lower temperature. Most importantly, the enzyme cannot be used for the production of 1,3-dioleoyl-2-palmitoylglycerol (OPO) and 1,3-stearoyl-2-oleoyl-glycerol (SOS) due to the high melting points of the substrates used for the reaction. Despite various engineering efforts used to improve the thermostability of ROL, the enzyme is unable to function at temperatures above 60 degreesC. Here, we describe the rational design of ROL to identify variants that can retain their activity at temperatures higher than 60 degreesC. After two rounds of mutagenesis and screening, we were able to identify a mutant ROL_10x that can retain most of its activity at 70 degreesC. We further demonstrated that this mutant is useful for the synthesis of SOS while minimal product formation was observed with ROL_WT. Our engineered enzyme provides a promising solution for the industrial synthesis of structured lipids at high temperature.

A robust biocatalyst for green Henry reaction was achieved. Based on the fact that Henry reaction requires a base for proton transfer, we firstly proposed that the catalytic triad of lipase could play this role. The distance between the substrate and the catalytic center and the surrounding amino acid interaction network were used as the criterion. Benzaldehyde and nitromethane were used as the model reaction, RNL (Lipase from Rhizopus niveus) was considered to be the best Henry reaction catalyst via a molecular dynamics simulation. Then experiments demonstrated that RNL has a yield of 48 % using model substrate in water. Further, in order to increase product yield, the chemical modifier 1, 2-cyclohexanedione (CHD) was used to modify Arg on RNL. As a result, RNL (CHD) increased the activity of catalyzing Henry reaction and had a broad spectrum of substrates, the yield of the product was as high as 67-99 %.

The cell surface engineering system, in which functional proteins are genetically displayed on microbial cell surfaces, has recently become a powerful tool for applied biotechnology. Here, we report on the surfactant modification of surface-displayed lipase to improve its performance for enzymatic synthesis reactions. The lipase activities of the surfactant-modified yeast displaying Rhizopus oryzae lipase (ROL) were evaluated in both aqueous and nonaqueous systems. Despite the similar lipase activities of control and surfactant-modified cells in aqueous media, the treatment with nonionic surfactants increased the specific lipase activity of the ROL-displaying yeast in n-hexane. In particular, the Tween 20-modified cells increased the cell surface hydrophobicity significantly among a series of Tween surfactants tested, resulting in 8-30 times higher specific activity in organic solvents with relatively high log P values. The developed cells were successfully used for the enzymatic synthesis of phospholipids and fatty acid methyl esters in n-hexane, whereas the nontreated cells produced a significantly low yield. Our results thus indicate that surfactant modification of the cell surface can enhance the potential of the surface-displayed lipase for bioconversion.

To develop a new approach for improving heterologous protein production in Aspergillus oryzae, we focused on the functional role of the N-terminal region of Rhizopus oryzae lipase (ROL). Several N-terminal deletion variants of ROL were expressed in A. oryzae. Interestingly, a segment of 28 amino acids from the C-terminal region of the propeptide (N28) was found to be critical for secretion of ROL into the culture medium. To further investigate the role of N28, the ROL secretory process was visualized in vivo using ROL-green fluorescent protein (GFP) fusion proteins. In cells producing ROL with N28, fluorescence observations showed that the fusion proteins are transported through endoplasmic reticulum (ER), Golgi, and cell wall, which is one of the typical secretory processes in a eukaryotic cell. Because the expression of the mature ROL-GFP fusion protein induced fluorescence accumulation without its translocation into the ER, N28 is considered to play a crucial role in protein transport. When N28 was inserted between the secretion signal and GFP, fluorescence observations showed that GFP, which is originally a cytoplasmic protein, was efficiently translocated into the ER of A. oryzae, resulting in an enhanced secretion of mature GFP after proteolytic cleavage of N28. These findings suggest that N28 facilitates protein translocation into ER and can be a promising candidate for improving heterologous protein production in A. oryzae.

In a culture medium, the Rhizopus oryzae strain produces only one form of lipase, ROL32. When the concentrated culture medium was stored at 0 degrees C during several months or kept at 6 degrees C during a few days, we noticed the appearance of a second shorter form of ROL32 lacking its N-terminal 28 amino acid (ROL29). ROL29 was purified to homogeneity and its 21 N-terminal amino acid residues were found to be identical to the 29-49 sequence of ROL32. The cleavage of the N-terminal peptide reduced the specific activity of ROL29 by 50% using either triolein or tributyrin as substrates. In order to explain this decrease of the specific activity of ROL29, we measured its critical surface pressure of penetration into phosphatidyl choline from egg yolk films which was found to be 10 mN/m, in contrast to a value of 23 mN/m found in ROL32. A kinetic study on the surface pressure dependency, stereoselectivity and regioselectivity of ROL29 was performed using the three dicaprin isomers spread as monomolecular films at the air-water interface. Our results showed that in contrast to ROL32, ROL29 presented a preference for the distal ester groups of one diglyceride isomer (1,3-sn-dicaprin). Furthermore, ROL32 was markedly more stereoselective than ROL29 for the sn-3 position of the 2,3-sn-enantiomer of dicaprin. A structural explanation of the enhanced penetration capacity as well as the catalytic activity of ROL32 was proposed by molecular modeling. We concluded that the N-terminal peptide of ROL32 can play an important role in the specific activity, the regioselectivity, the stereoselectivity and the binding of the enzyme to its substrate.

Combinatorial libraries of the lid domain of Rhizopus oryzae lipase (ROL; Phe88Xaa, Ala91Xaa, Ile92Xaa) were displayed on the yeast cell surface using yeast cell-surface engineering. Among the 40,000 transformants in which ROL mutants were displayed on the yeast cell surface, ten clones showed clear halos on soybean oil-containing plates. Among these, some clones exhibited high activities toward fatty acid esters of fluorescein and contained non-polar amino acid residues in the mutated positions. Computer modeling of the mutants revealed that hydrophobic interactions between the substrates and amino acid residues in the open form of the lid might be critical for ROL activity. Based on these results, Thr93 and Asp94 were further combinatorially mutated. Among 6,000 transformants, the Thr93Thr, Asp94Ser and Thr93Ser, Asp94Ser transformants exhibited a significant shift in substrate specificity toward a short-chain substrate. Computer modeling of these mutants suggested that a unique oxyanion hole, which is composed of Thr85 Ogamma and Ser94 Ogamma, was formed and thus the substrate specificity was changed. Therefore, coupling combinatorial mutagenesis with the cell surface display of ROL could lead to the production of a unique ROL mutant.

Rhizopus oryzae lipase (ROL) was found to be a true lipase. This enzyme presents the interfacial activation phenomenon. The N-terminal amino acid sequence of ROL was compared to those of rhizopus lipases. Purified ROL possesses the same N-terminal sequence as the mature Rhizopus niveus lipase (RNL). This sequence was found in the last 28 amino acids of the propeptide sequence derived from the cDNA of Rhizopus delemar lipase (RDL). Using the baro-stat method, we have measured the hydrolysis rate of dicaprin films by ROL as a function of surface pressure. Our results show that Rhizopus oryzae lipase is markedly stereoselective of the sn-3 position of the 2,3 enantiomer of dicaprin. Polyclonal antibodies (PAB) directed against ROL have been produced and purified by immunoaffinity. The effects of these PAB on the interfacial behavior of ROL were determined. The immunoblot analysis with polyclonal antibodies anti-ROL (PAB anti-ROL) and various lipases shows a cross-immunoreactivity between the lipase from the rhizopus family (Rhizopus delemar lipase and Rhizopus arrhizus lipase).

A lipase from Rhizopus oryzae DSM 853 (ROL) was cloned from a chromosomal gene bank, sequenced and overexpressed in Escherichia coli. ROL and its precursors ProROL and PreProROL were purified and their pH and temperature profile was determined. In contrast to ROL, ProROL and PreProROL had considerably higher thermostability and a slightly higher pH optimum. Moreover, it could be demonstrated by in vitro experiments that the natural leader sequence of ROL is able to inhibit the folding supporting properties of the prosequence, resulting in a retardation of folding. In addition, there is strong evidence that all different lipase forms derived from Rhizopus sp. described in the literature are a result of different proteolytic processing and originate from the same gene.

The fungus Rhizopus oryzae synthesizes an extracellular lipase precursor bearing N-terminal pre- and pro-sequences. Our studies in Escherichia coli and using recombinant lipase in vitro indicate that the prosequence of 97 amino acids has at least two functions. First, it modulates the enzyme activity of the lipase so that this enzyme can initially be synthesized in a non-destructive form. Direct synthesis of the mature form of the lipase in the cell has toxic consequences, at least partly because of phospholipase activity that is suppressed in the proprotein. Secondly, it supports folding of the lipase via a pathway influenced by a single cysteine residue at position - 68. Mutational analysis of the prosequence demonstrates not only the key role of this cysteine residue but also the importance of the neighbouring amino acids. In particular, Arg-69 probably enhances the leaving group character of Cys-68. We propose a model in which Cys-68 acts as an intramolecular thiodisulphide reagent, playing a catalytic role in the folding of the enzyme. The prosequence is capable of performing the described functions both in cis and in trans.

Both an active enzyme conformation and stabilization of tetrahedral transition states are essential for the catalysis of ester bond hydrolysis by lipases. X-ray structural data and results from site-directed mutagenesis experiments with proteases have been used as a basis for predictions of amino acid residues likely to have key functions in lipases. The gene encoding a lipase from Rhizopus oryzae was cloned and expressed in Escherichia coli. Site-directed mutagenesis of this gene was used to test the validity of computer-aided predictions of the functional roles of specific amino acids in this enzyme. Examination of the kinetic constants of the Rhizopus oryzae lipase variants allowed us to identify amino acid residues which are directly involved in the catalytic reaction or which stabilize the active geometry of the enzyme. The combination of these results with molecular mechanics simulations, based on a homology-derived structural model, provided new information about structure-function relationships. The interpretation of the data is consistent with results obtained with other hydrolases, such as proteases.

The crystal and molecular structure of Lipase II from Rhizopus niveus was analyzed using X-ray single crystal diffraction data at a resolution of 2.2 A. The structure was refined to an R-factor of 0.19 for all available data. This lipase was purified and crystallized as Lipase I, which contains two polypeptide chains combined through non-covalent interaction. However, during crystal growth, Lipase I was converted to Lipase II, which consists of a single polypeptide chain of 269 amino acid residues, by limited proteolysis. The structure of Lipase II shows a typical alpha/beta hydrolase fold containing the so-called nucleophilic elbow. The catalytic center of this enzyme is analogous to those of other neutral lipases and serine proteases. This catalytic center is sheltered by an alpha-helix lid, which appears in neutral lipases, opening the active site at the oil-water interface.

Considerable controversy exists regarding the exact nature of the molecular mechanism of interfacial activation, a process by which most lipases achieve maximum catalytic activity upon adsorption to an oil water interface. X-ray crystallographic studies show that lipases contain buried active centers and that displacements of entire secondary structure elements, or "lids," take place when the enzymes assume active conformations [Derewenda, U., A. M. Brzozowski, D. M. Lawson, and Z. S. Derewenda. 1992. Biochemistry: 31: 1532-1541; van Tilbeurgh, H., M-P. Egloff, C. Martinez, N. Rugani, R. Verger, and C. Cambillau. 1993. Nature: 362: 814-820; Grochulski, P., L. Yunge, J. D. Schrag, F. Bouthillier, P. Smith, D. Harrison, B. Rubin, and M. Cygler. 1993. J. Biol. Chem. 268: 12843-12847]. A simple two-state model inferred from these results implies that the "closed" conformation is stable in an aqueous medium, rendering the active centers inaccessible to water soluble substrates. We now report that in crystals of the Humicola lanuginosa lipase the "lid" is significantly disordered irrespective of the ionic strength of the medium, while in a related enzyme from Rhizopus delemar, crystallized in the presence of a detergent, the two molecules that form the asymmetric unit show different "lid" conformations. These new results call into question the simplicity of the "enzyme theory" of interfacial activation.

The stability of globular proteins arises largely from the burial of non-polar amino acids in their interior. These residues are efficiently packed to eliminate energetically unfavorable cavities. Contrary to these observations, high resolution X-ray crystallographic analyses of four homologous lipases from filamentous fungi reveal an alpha/beta fold which contains a buried conserved constellation of charged and polar side chains with associated cavities containing ordered water molecules. It is possible that this structural arrangement plays an important role in interfacial catalysis.

Lipases from filamentous fungi have been studied extensively over many years. They exhibit properties attractive for industrial applications, e.g. in laundry detergents, tanning and paper industries and stereospecific organic synthesis. Enzymes from the fungi Rhizomucor miehei and Geotrichum candidum have been among the first neutral lipases to be characterized structurally by X-ray diffraction methods. In this paper we report a preliminary account of crystallographic studies of three other fungal lipases homologous to that from R. miehei and obtained from Humicola lanuginosa, Penicillium camembertii and Rhizopus delemar. These newly characterized structures have important implications for our understanding of structure-function relationships in lipases in general and the molecular basis of interfacial activation.

Complementary DNA encoding Rhizopus niveus lipase (RNL) was isolated from the R. niveus IF04759 cDNA library using a synthetic oligonucleotide corresponding to the amino acid sequence of the enzyme. A clone, which had an insert of 1.0 kilobase pairs, was found to contain the coding region of the enzyme. The lipase gene was expressed in Escherichia coli as a lacZ fusion protein. The mature RNL consisted of 297 amino acid residues with a molecular mass of 32 kDa. The RNL sequence showed significant overall homology to Rhizomucor miehei lipase and the putative active site residues were strictly conserved.

A lambda gt11 cDNA library was constructed in Escherichia coli using poly(A)-selected mRNA from the fungus, Rhizopus (Rp.) delemar. Lipase-producing members of the library were identified by means of a phenotypic score wherein the release of fatty acids by lipase causes a characteristic color change in the growth medium. One such isolate contained a 1287-bp insert (LIP cDNA) which hybridizes to 1.25- to 1.35-kb mRNA species from Rp. delemar. The lipase produced in E. coli containing the LIP cDNA exhibits the same substrate selectivity as the authentic fungal enzyme, hydrolyzing ester bonds at the stereospecific numbering (sn) sn-1 and sn-3, but not the sn-2, positions of triglycerides. The complete nucleotide sequence of the LIP cDNA was determined. By reference to the N-terminal sequence of authentic Rp. delemar lipase, the lipase-encoding region was identified within this fragment. The LIP cDNA encodes a putative preprolipase consisting of a 26-amino-acid(aa) signal sequence, a 97-aa propeptide, and a 269-aa mature enzyme. The predicted mature lipase has the same molecular weight and aa composition as that of Rp. delemar, is highly homologous to that produced by the fungus Rhizomucor miehei, and contains the consensus pentapeptide (Gly-Xaa-Ser-Yaa-Gly) which is conserved among lipolytic enzymes. It is concluded that the LIP cDNA is an essentially full-length analogue of the lipase-encoding gene of Rp. delemar. The lipase encoded by the LIP cDNA occupies a cytoplasmic location when synthesized in E. coli. Unprocessed forms of the lipase accumulate in E. coli.